Machines

Is designed for cutting of waste rolls. In the standard version, the cutter is delivered with a prismatic bed. In the extended version, the cutter is delivered with features fastening the rolls manipulation process.

Low-consistency vertical pulper LCV is designed for continuous and periodical pulping of fibrous materials, such as chemical pulp, ground wood, waste paper (incl. papers with increased wet strength), own broke, mineral fibres, asbestos etc.

Are designed for a highly intensive periodical pulping of white waste paper and laminated papers type TetraPak with a consistency from 10 to 15 %.

Horizontal pulper HV is designed for continuous and semicontinuous pulping of heavy impure fibrous materials, such as waste paper including papers with increased wet strength.

Spinning impurities ragger SN is designed for drawing of spinning impurities out of a pulper tank, particularly during waste paper pulping.

Spinning impurities cutter DZS is designed for mechanical cutting of spinning impurities tangle being drawn from pulper chest (horizontal or vertical type) while pulping waste paper.

Pulper screen PSN belongs to a family of secondary pressure pulpers. Machine is designed particularly for separation of unwished impurities, such as foils, plastic particles, leathers, rubber pieces, rags, woods etc.

Rotary rejects dewatering drum OBN is designed for dewatering of washed rejects at separation of impurities from pulper of waste paper and periodical reject separator PSN

The rejects dewatering press OLV is primarily designed for installation in lines for waste paper processing, i.e. for dewatering of rejects from pulpers (horizontal or vertical),

Washing separator VSV is designed for deflaking, final screening and washing of rejects coming from primary cleaners in waste paper processing lines.

Deflaking separators VDT are designed for primary screening of waste paper stock together with deflaking of unpulped pieces of paper.

Pressure screen STU is designed for screening sections of stock preparation lines. Its main features are high capacity, very good screening efficiency, minimum loss of fibres in rejects and low demands on installation, attendance and servicing.

Cleaners can be used for primary separation of the biggest coarse impurities in coarse contamined waste paper processing lines.

Sand traps OP are designed for removal of sand and larger impurities in coarse contamined waste paper processing lines directly behind the primary cleaning stage

Cleaners are used for a highly efficient fine separation of specifically coarse, sticky and conic impurities in PM approach part, in mechanical pulp mills and in waste paper processing lines.

Dewatering machine (thickener) OK is designed for thickening of fibrous stocks in pulp and paper industry, i.e. chemical pulp, ground wood, waste paper, rag pulp etc.

Are designed for deflaking of waste paper, machine broke, chemical pulp and defibration of knotter-screening pulp and other sorts of rejects from separators. Disc refiners D, 2D are used for refining of paper stock.

Vibrating screen VP is designed for screening in lines for processing of chemical pulp, ground wood and waste paper as an end part for final sorting of reject from screening stages.

Mixing equipment PC with a horizontally installed agitator of a HP family is designed for mixing and homogenizing of fibrous suspensions with consistency up to 5 %.